|
 Now accepting Visa, MasterCard, and American Express
Zygo® Mark-series interferometer upgraded to phase with Zygo® Visual Phase Upgrade
****Resulting in a Phase Measuring Interferometer very similar to a Zygo® GPI/XP and VeriFire XP****
Refurbished Mark-series mainframe with new Dell computer with WindowsXP, MetroPro 8.3.5 and software license, new Phase Shifter (PMR), new Accessory Receptacle (TF holder), new frame grabber board & CAN electronics. Also, new Pulnix CCD camera installed in the Mark mainframe. We are always in a build cycle for this instrument upgrade. System integration done by Zygo Service Engineer and 100% guaranteed to factory specs.......$38,500
This latest upgrade used a Mark IV-XP mainframe. It is built and tested - ready to ship!
Click here for Zygo® Phase Upgrade brochure
Zygo® Mark-II with IntelliWave - This is a system taken out of service that was a complete PMI - a Mark-II with IntelliWave software.......$15,000
ADE-Phase Shift Technology OptiFlat II - 2000 vintage with OptiCode 4.20 S/N 18669
Wyko RTI-6100 Interferometer, 6-inch Phase Measuring system. Manufactured in 2004. Dell PC with Vision 32 software. Includes 6" TF. Optional 6" to 10" beam expander available with custom 12" mount on rails to easily slide parts in and out of beam. $39,950
Zygo® Mark-IV Interferometer, S/N 88-12-4083, this is a Phase Measuring Interferometer (PMI), but it is quite old. It uses a "processor box" versus a PC and is slow as molasses, but it does work! Great way to get an inexpensive PMI in-house. It can be upgraded with new electronics, new PC and latest software at a later date. $17,500
Zygo® Mark-II Interferometer, industry standard interferometer for years. Use as-is as a visual, fringes-only system or we can upgrade with one of several phase measuring packages. Easily supported with spare parts from Zygo. $9,995
Zygo® Mark-II Interferometer at 1064NM, S/N 87- 26-017. The 1064 laser is missing, but it should be easy to interface a new laser via the fiber optic beam delivery system - which is already installed inside the mainframe. Buy it as-is and use as a static fringe interferometer or I can arrange the installation of a phase measuring package of your choice. Call for details. Price for mainframe: $19,500
Veeco RTI-4100 4" Interferometer, completely serviced and upgraded to 4D Technology's 4Sight Software. A complete, modernized phase measuring interferometer. Price: $35,000
Zygo® Mark-series interferometer upgraded to phase with IntelliWave
Refurbished Mark-series mainframe with IntelliWave software.......Price: $29,500
ADE-PST MiniFIZ 100P 4-inch Interferometer, S/N 55-487 SOLD the mainframe, PC HW/SW package still available
Interferometer mainframe (with PMOD Phase Shifter) and computer with OptiCode version 4.23 (with dongle), has a dead laser. I installed a loaner laser and tested the system. Took great data; PMOD (piezos) calibrated. Align, Zoom, and Aperture Focus all good. Align and View cameras good. I can deliver either with a new laser installed or you can install your own.
ESDI Intellium Z-100, 4" Phase Measuring Interferometer, using IntelliWave software.
Zygo® FlashPhase Data Analysis, complete package with Dell computer, frame grabber board - $5,900
Davidson Optronics Interferometers12-inch....D-312 Interferometer - like new, excellent condition (pictures available). Recently tested the 12" TF for this system. It was only 1/5 to 1/4 wave. Price reduced to $29,500 SOLD
5-inch....D-305 Interferometer, This is a vertical 5" interferometer. Completely reworked, disassembled, cleaned, re-painted, re-aligned...like new when completed. $4,950. To add laser +$1,500. To add camera and monitor for fringe viewing + $800. Fringe tracing software can also be added, now or later.
2 1/2 inch....D-308 - mercury bulb source (needs replacement) S/N 184
GOMEZ CYLINDER interferometer and seven (7) gratings, includes:
Gomez Cylinder Interferometer (working, laser fires) or you can use your existing interferometer.
124 mm Grating - some scratches
250 mm Grating
300 mm Grating
450 mm Grating
750 mm Grating
1,000 mm Grating
2,200 mm Grating
SOME BASIC USAGE INSTRUCTIONS - A technical paper on the setup is also available.The grating is aligned normal to the interferometer in align mode. There will be a converging beam reflected at approximately 50 degrees (changes slightly with F# ) going one direction and a diverging beam going the opposite way. By flipping the grating you can reverse the directions. The converging beam comes to a line focus and a concave test piece is placed at a distance equal to the radius away from the focal point of the grating. Align the spots in alignment mode then switch to test and fine tune the alignment. The test piece needs to be on a 4 axis stage and the axis of focus is normal to the reflected grating beam.
Point Diffraction Interferometer (PDI) plates manufactured in Germany - 2nd generation - $100
With these plates it's very easy to build a point diffraction interferometer, e.g. testing a telescope mirror. You only need a cheap red laser diode (without collimating lens), the PDI plate, a 3-axis stage and a camera.
Specifications:
Transmission: 0.2% at 650nm, less than 0.2% at shorter wavelengths
Dimensions: 10mm x 18mm x 2mm
Material: Fused Silica
Process: Electron beam lithography
Coating: Chrome
Antireflection coating of back side: for 532nm
Diameter of pinholes in µm: 1.0, 1.6, 2.5, 4.0, 6.3, 10, 16, 25, 40, 63, 100
Number of pinholes: 5 of each diameter
Distance between pinholes: 1.0mm
Window for Phase Contrast Test: 3mm x 1mm
NEW 10.6 micron Interferometer system
- Built to-order phase-measuring 10.6 micron system.
- Small footprint of 20" x 15" x 6" - center line height is 4.25 inches
- Output aperture is 63.5 mm aperture - Plano wavefront - TF included
- Sensor is FLIR/Indigo Photon Core, 320 X 256.
- Laser is Access Laser Inc. - LASY-4S with polarization option.
- Manufactured in USA.
- Installation is recommended but not required - installation to be quoted on an as-needed basis.
Price: $130K, including either Durango or IntelliWave software. Delivery is 20 weeks ARO.
Terms: 50% down payment, 25% at installation and 25% Net 30
Zygo® MESA S/N 98-05-66005
The MESA is a unique measuring tool from Zygo. It uses diffraction grating technology to simulate an "extended wavelength" and allows for measuring parts with very rough surfaces (up to 2.5u Ra) and large departures (up to 150 microns) from flatness. Will have new computer with latest software installed by Zygo. $29,500
Graham 0.375” Interferometer with video
Wyko 600D Interferometer, 6" aperture, includes "fixed" TF on front
Operating at 633 NM. Has 6x zoom and alignment system. No computer- phase shifter not working. Best if used as a "fringes only" system or be prepared to add a phase shifter. Call for details. Price: $9,995
Custom Fiber Connector Phase Measuring Interferometer
Small aperture for fiber ends; 1.5 to 2.0 mm; Vertical configuration, downward looking.
Ready for addition of Phase Analysis Software. Manual stage.
Price: $4,995 Feel free to make an offer
I am listing this for a friend. They want to move it.
Page Last Updated: 1/31/2012 7:16:01 AM
|
|
